JIMA Copper 86-21-35322273
1 OZ ED Copper Foil High Ductility 500 - 5000 Meter Length 1380mm Width

1 OZ ED Copper Foil High Ductility 500 - 5000 Meter Length 1380mm Width

  • High Light

    copper foil paper

    ,

    hvlp copper foil

  • Purity
    99.95%
  • Pinholes
    None
  • Anti Oxidation
    180 Degree 60 Minutes, 180 Days 23 Degree
  • Thickness
    1/2 Oz,3/4 Oz,1 Oz,2 Oz,
  • Color
    Red Or Black
  • Elongation
    ≥ 1.5%
  • Tensile Strength
    ≥ 160 MPa
  • Peel Strength
    ≥ 1 N/mm
  • Foil Profile
    RA≤0.15μm,Rz≤1.7μm
  • Application
    FCCL,FPC
  • Length Per Roll
    500 - 5000 Meter
  • Inter Diameter
    76 Mm,152 Mm, 3 Inch,6 Inch
  • Place of Origin
    china
  • Brand Name
    JIMA
  • Certification
    SGS, ISO,Reach, RoHS
  • Model Number
    EDCU-HC
  • Minimum Order Quantity
    100kg
  • Price
    negotiation
  • Packaging Details
    wooden carton
  • Delivery Time
    5-15 days
  • Payment Terms
    T/T, L/C
  • Supply Ability
    1000 Ton per month

1 OZ ED Copper Foil High Ductility 500 - 5000 Meter Length 1380mm Width

1oz ED electrolytic High ductility copper foil

 

Their characteristics differ, and an understanding of these differences is important to ensure the correct selection of copper foil for each application or environmental condition.

 

Thickness: 1OZ

Width: 1380 mm

Length: 500-5000 M

ID: 76 mm,152 mm

Purity:99.8%

 

Manufacturing Process:

In an electrodeposited copper manufacturing process, the copper foil is deposited on a titanium rotating drum from a copper solution where it is connected to a DC voltage source. The cathode is attached to the drum and the anode is submerged in the copper electrolyte solution. When an electric field is applied, copper is deposited on the drum as it rotates at a very slow pace. The copper surface on the drum side is smooth while the opposite side is rough. The slower the drum speed, the thicker the copper gets and vice versa. The copper is attracted and accumulated on the cathode surface of the titanium drum. The
matte and drum side of the copper foil go through different treatment cycles so that the copper could be suitable for PCB fabrication. The treatments enhance adhesion between the copper and dielectric interlayer during copper clad lamination process. Another advantage of the treatments is to act as anti-tarnish agents by slowing down oxidation of copper.

 

Application:

.Epoxy board

 

Difference between CA copper foil and ED copper foil

Property Electrodeposited Rolled
  8um 18um 35um 70um 18um 35um 70um
Tensile strength,kpsi 15 33 40 40 20 22 28
Elongation,% 2 2 3 3 8 13 27

Vol resistivity

Mohm.cm

  1.66 1.62 1.62 1.78 1.74 1.74

 

 

FAQ:

 

Q1. Can we come to China visit factory ?

Yes ,you can .

 

Q2. Can you cut into small size?

Yes, we can.

 

Q3. Is the copper foil Floating in box?

Yes, it is .

 

 

Typical properties of high ductility copper foil

 

Classification

 

Unit Requirement Test Method
Foil Designation / T H M 1 2 3 IPC-4562A
Nominal thickness / 12um 1/2 OZ 3/4 OZ

1

OZ

2

OZ

3

OZ

IPC-4562A
Area Weight g/㎡ 107±4 153±5 228±8 285±10 580±15 860±20

IPC-TM-650

2.2.12.2

Purity ≥99.8

IPC-TM-650

2.3.15

Foil Profile Shiny side (Ra) սm ≤0.4 ≤0.4 ≤0.4 ≤0.4 ≤0.4 ≤0.4

IPC-TM-650

2.3.17

Matte side(Rz) um ≤6 ≤8 ≤10 ≤10 ≤15 ≤20
Tensile Strength

R.T.(23℃)

 

Mpa ≥150 ≥150 ≥235 ≥280 ≥280 ≥280

IPC-TM-650

2.3.18

Elongation

R.T.(23℃)

 

≥5 ≥5 ≥10 ≥10 ≥15 ≥15

IPC-TM-650

2.3.18

Subject Ω.g/㎡ ≤0.170 ≤0.166 ≤0.162 ≤0.162 ≤0.162 ≤0.162

IPC-TM-650

2.5.14

Peel Strength(FR-4) N/mm ≥1.0 ≥1.3 ≥1.6 ≥1.6 ≥2.1 ≥2.1

IPC-TM-650

2.4.8

Pinholes&porosity Number No

IPC-TM-650

2.1.2

Anti-oxidization R.T.(23℃) day 180 /
H.T.(200℃) Minutes 60 /

3. Standard Width,1380(±1)mm,May according to the customer request tailor.

We test the peel strength with FR-4(Tg140) prepreg ,please reconfirm with your pp.