3oz RED electrolytic High ductility copper foil
There are various types of copper foil are offered; in a range of weights (thicknesses). Their characteristics differ, and an understanding of these differences is important to ensure the correct selection of copper foil for each application or environmental condition.
Width: 1380 mm
Length: 500-5000 M
Internal diameter: 76 mm and152 mm
Electrodeposited copper crystals tend to grow lengthwise in the Z-axis of the foil. Typically, a polished section of
electrodeposited copper foil has the appearance of a picket fence, with long crystal boundaries perpendicular to
the foil plane. Rolled copper crystals are broken and crushed during the cold rolling operation. They are smaller
than the electrodeposited crystals, and have irregular, spherical shapes, nearly parallel to the foil plane.
In an electrodeposited copper manufacturing process, the copper foil is deposited on a titanium rotating drum from a copper solution where it is connected to a DC voltage source. The cathode is attached to the drum and the anode is submerged in the copper electrolyte solution. When an electric field is applied, copper is deposited on the drum as it rotates at a very slow pace. The copper surface on the drum side is smooth while the opposite side is rough. The slower the drum speed, the thicker the copper gets and vice versa. The copper is attracted and accumulated on the cathode surface of the titanium drum. The
matte and drum side of the copper foil go through different treatment cycles so that the copper could be suitable for PCB fabrication. The treatments enhance adhesion between the copper and dielectric interlayer during copper clad lamination process. Another advantage of the treatments is to act as anti-tarnish agents by slowing down oxidation of copper.
1. Polyimide board
2. Epoxy board
Difference between CA copper foil and ED copper foil
Q1. How to save after the box opened?
Keep the dry environment,and is better use it in 30days.
Q2. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q3. what is your standard width?
A: 1380mm,we accept customization for the width. we can cut it into any size that you demand after pass discussing.
Typical properties of high ductility copper foil
|Nominal thickness||/||12um||1/2 OZ||3/4 OZ|
|Foil Profile||Shiny side (Ra)||սm||≤0.4||≤0.4||≤0.4||≤0.4||≤0.4||≤0.4|
3. Standard Width,1380(±1)mm,May according to the customer request tailor.
We test the peel strength with FR-4(Tg140) prepreg ,please reconfirm with your pp.