Payment & Shipping Terms:
|Thickness:||12-100μm||Corrosion Resistance:||No Exfoliation|
|Peel Strength:||≥ 2 N/mm||Application:||XEV: Hybrid-electric Vehicle.(HEV) ,Parallel Hybrid Electric Vehicle(PHEV) ,Electric Vehicle(EV),Lithium-ion Batteries Supercapacitor|
aluminum foil roll,
thin aluminum foil
current collector gray Modified Nano graphite coated aluminium Foil for Lithium-ion batteries Super capacitor
. Lithium-ion supercapacitor
1. Improve the surface tension, and increase the adhesion between the aluminium foil and the active material.
2. Decrease the using amount of binder for the electrode ,enhance energy density of the battery ,and lower the cost of the electrode production
3. Protect the AI current collector from surface corrosion and oxidation.
Physical and chemical properties of CAW1 product.
1.1 Use the product under the temperature of 20-25℃ and humidity of ≤20%RH
1.2 The coating layer is highly Hydrophilic, handle it under personal protection.
1.3 Avoid using the product under dust, The dust purification should be over 0.1M.
The product type,quantity ,production date and place etc, are indicated on the package.
usage and storage:
2.1 Use the product in the workshop with humidity of ≤20%RH and a high dust purification.
2.2 Store the product below 35℃, do not open the vacuum package before use .after use ,the left product should be dried at 40-60℃ for 2 hours under vacuum ,then kept in the cabinet filled with nitrogen at room temperature.
2.3 The product can be stored under vacuum package for one year at ambient temperature and moisture without direct sun. Once the vacuum package is opened, the product can be kept under vacuum cabinet for at most one month.
Contact Person: Mr.huang